Use with a standard 1/10th gal caulking gun to inject or apply thickened epoxy. Holds approximately 10fl oz.

FILLING AND USING:

1. Remove the plunger.
2. Fill tube with epoxy mixture.
3. Replace the plunger.
4. Insert filled tube into a standard caulking gun.
5. Trim the spout for the desired bead size and dispense.

To reuse before epoxy cures, insert a blunt 12″ long stiff rod or dowel through the spout to push the plunger back out the end of the tube.

To reuse after the epoxy cures, flex and squeeze tube to release cured epoxy from plastic sides, then insert a blunt 12″ long stiff rod or dowel through the spout to push the plunger and solid epoxy pug back out the end of the tube.